Gfci Maintenance, Ground Fault Circuit Interrupter Testing

Gfci maintenance is a very easy and very foremost procedure. Just like many other house maintenance tasks, maintaining functional and properly operating Gfci outlet receptacles will ensure that you and your house are protected from a ground fault.

Ground Fault - it's when the electricity, instead of following its general path - electrical wire - passes through a person's body to the ground. That person becomes a conductor (wire) and you may know this health as an electrical shock.

SHOCK YOU LIKE AN ELECTRIC EEL

* Never paint Gfci outlet receptacle! If you've just moved into the house and installed Gfci's are covered with paint - replace them immediately. Removing paint from their face is not enough, even if Ground Fault Circuit Interrupter appears to be responding to the test buttons.

* Never insert into an outlet receptacle objects other than a plug designed for its configuration.

* Avoid spilling liquids onto the expedient - it could corollary in permanent damage or malfunctioning.

Testing is the most foremost part of the Gfci maintenance disposition and it should be performed on monthly basis. The theorize is very easy - Ground Fault Circuit Interrupter outlet receptacles are just like any other electronic devices - sometimes they fail.

There are two easy ways to perform this test:

Gfci Testing method #1
1. Plug a lamp into the Gfci outlet receptacle.
2. Push the "Test" button on the Gfci - it should trip and cut the power to the lamp. In some devices the Reset button will pop out, in others the button will appear to be staying in the same position, you just hear the click immediately after depressing "Test" button.
3. If the lamp is still On after pressing "Test" button (some devices also have an indicator light), your Gfci outlet receptacle could be improperly wired or damaged, and you are not protected - call a licensed electrician.

Gfci Testing #2
This will cost you a few bucks (literally), but with a easy testing expedient you'll be able to detect a possible life threatening problem immediately, and test all of your outlets - it's worth it! Basic Gfci testers can be purchased in any local hardware store or online for under .00.

1. Insert your tester into the Gfci outlet (or Gfci protected outlet).
2. View the indicators on the tester and compare them with the chart attached to its body - this is to verify that the power is On and that the outlet is wired properly.
3. If the readout indicates a problem, consult a licensed electrician.
4. If circuit appears to be wired properly, push the Gfci Test button on top of the expedient - the Gfci outlet should trip and tester lights go Off.
5. If the tester fails to trip Gfci outlet, there is either some wiring problem or faulty Gfci outlet - call a licensed electrician

I very recommend to notify yourself with currently required Gfci locations and if you settle to upgrade your home with those safety devices, I have a Gfci premise manual ready for you - enjoy it.

This is it, you've just learned how to perform basic Gfci maintenance and testing - don't forget to do it on monthly basis.

Gfci Maintenance, Ground Fault Circuit Interrupter Testing

SHOCK YOU LIKE AN ELECTRIC EEL